PLASTIC HELMET VISORS

Visor has 3 adjustable snaps that adjust to fit any open faced helmet.

#99-HP-17534 white colored visor        $5 ea

Limited quantities – available while supply lasts

BARUFFALDI Tear-off Helmet Visor

Designed by Roger DeCoster. Incorporates clear tear-offs on the visor so that at the start of muddy races you merely put your head down, look through the visor, and remove tear-offs as needed to keep your goggles mud free. Has 3 adjustable snaps for easy helmet installation.

#99-HP-17560 smoke color visor - $5 ea

clear plastic replacement “Tear-offs” for

Baraffaldi helmet visor

#99-HP-17561 – 3 sets for $1

face protector to fit XR500 series SuperSeer gogles

Blue  or  Red  -       $4 each

face protector to fit XR500 series SuperSeer gogles

Yellow or  Black    -   $4 each

Model 503

SuperSeer Replacement Lenses

fits XR500 series gogles - size 7-11/16" (195mm) wide

   3-3/16" (80mm) high

available in Amber, Polarized, Clear,

Green - all weather, Smoke Brown & Fog Cutt*R

close-out priced at  $1 each

Model 504

SuperSeer Replacement Lenses

fits XR500 series gogles - size 8-1/16" (205mm) wide

   3-1/4" (82mm) high

available in Amber, Polarized, Clear,

Green - all weather, & Smoke Brown

close-out priced at  $1 each

Model 505

SuperSeer Replacement Lenses

fits XR500 series gogles - size 7-11/16" (195mm) wide

   3-1/4" (82mm) high - has 2 side holes

available in Amber, Polarized, Clear,

& Smoke Brown

close-out priced at  $1 each

(as used by Carl Cranke on his winning bikes)

Original NO-DIVE
Made of light weight aluminum. Bolts to the front backing plate and connects to the lower triple tree via an aluminum rod. Prevents the front suspension from “diving” while braking.

YAMAHA YZ (76+) mounting kit –   $21 each

                 fits 38mm forks  only 2 in stock

RM SUZUKI  mounting kit –       $21 each                      fits 36mm forks  only 4  in stock

Available in 3 colors. Washable and reusable.
#1-48-101 – Black
#1-48-102 – Silver
#1-48-103 – Blue
                               Only $20 pair

Available in 2 colors. Washable and reusable.
#1-50-101 – Black
#1-50-105 – RED        Only $20 pair

Hi-Point BLUE FORK GAITERS

for 70's and early 80's mini bikes

8" long, fits 27mm upper fork, 48mm lower leg

Close-out priced at   $15 pair

Preston Petty FORK PROTECTORS

white plastic, fits on lower fork leg with ty-wraps (included)

Close-out priced at    $10 pair

A

B

HANDLEBAR CLAMPS

FOR 1968-71 CERIANI TOP FORK PLATES

A - #2-4-000  -          $3 each
             chrome U-bolt
B - #2-3-000 -            Sold out

              saddle clamp

Indian side panel decal

Indian 175 Side Panel Decal

Vinyl self adhesive decal printed in red, white & blue

measures 10.5" in length - available only as shown

Close-out priced at  $2 each

NO-TOIL BIODEGRADABLE
AIR FILTER OIL KIT

The fast and easy way to clean and oil your air filter. No need to use gasoline or solvents to clean your filter. No-Toil is alcohol based which dries fast, is ultra tacky, will not drip all over your air box, will not wash off with water, yet is quick and easy to clean with the No-Toil air filter cleaner.
      Each kit contains:
           1 btl. Of filter oil
           1 btl. Of cleaner
           1 tube of rim grease

#99-NOTOIL -            $18 kit

Motion Pro TAIL LIGHT / PLATE HOLDER

Ideal for enduro and off-road use. Comes with double filament 12 volt bulb. Red plastic lens is made of Lexan to resist breakage. Rubber flap easily bolts to any rear fender and will accept standard size motorcycle license plates.

#51-11-040-600 -     $48.00 each

    A             B                     C

Reproduction Honda Contact Points

A- #99-HP-22-88801   -    $5 each

          CB350/360 Right (Honda #30203-286-004)

B- #99-HP-22-88802   -     Sold out

          CB350/360 Left (Honda #30204-286-004)

C- #99-HP-22-88803   -      $5 each

          CB450/GL1000 Right  (Honda #30203-292-003)

includes plastic throttle assembly and handlebar grip

close-out priced at    $10 kit

PUCH

Hi-Point THROTTLE CABLE

for 125/175cc Puch with grey covering

for metal Magura throttle to 26mm Bing

Outside casing measures 42" long

#99-HP-904 -        $12 each

made in England by Ted Wassel

Dunlop RIM LOCKS

fits size WM1 rims (front)

#99-HP-906 -         $5 each

Plastic oval number plates

size - aprox. 9" (230mm) x 11" (280mm)

#55-01-090-100   Yellow -      $5 each

#55-01-090-200    White -      $5 each

           or 3 for $12

# 99-MAR-611A - close-out   $60 ea         NOTE: only 1 in stock

NOS Clip-On Bars
Chrome steel bar connects to alloy fitting with split perch (secured with 4 allen head screws).  clamps to 40mm fork leg.  Extension bar measures10-1/4" long.

# 99-MAR-L326 - close-out   $60 ea       NOTE: only 1 in stock

NOS Clip-On Bars
Black painted steel bar connects to alloy bracket with 32mm center hole.  clamps to top of fork leg. 43.5mm diam. x 1.8mm deep recess on top of mounting bracket.. 55mm extension from leg bracket. Extension bar measures8-3/4" long.

# 99-MAR-613B - close-out   $60 ea       NOTE: only 1 in stock