PREVIOUS PAGE          HOME PAGE         ORDERING INFO

 

Wheel Parts for 1972-1989

PENTON and KTM motorcycles

SHOES / SPROCKETS / AXLES / BEARINGS / NUTS / CLIPS

 

(NOTE: parts are available only while supplies last - prices subject to change without notice)

This is a small sampling of the popular items requested for wheel parts.

There are too many items in our inventory to be shown on this web site

and there are many items that are not available or exist in small quantities.

Refer to the Penton / KTM Parts Lists to find the drawing of the part you are in need

of, write down the part number and call for pricing and an inventory check.

 

Call: Al Buehner - (216) 651-6559   Mon-Fri    8:30am to 5pm E.S.T.

or Fax us a list of your quantities and part numbers: 216-651-1620

Penton/ KTM Brake Shoes & Pads

 

#31-09-035-000 -      $26
         EBC brand front & rear shoes for 1968+ bikes

       includes spring (not shown)
EBC brand rear brake shoes
for 1973+ conicle hub bikes

#52-10-035-560 -       $38
       includes 2 springs (as shown)
 

Ferodo sintered disc brake pads

for 1985-86 KTMs

#565-13-209-000 -      $30

 
#565-13-209-444 -       $35

Sintered disc brake pads for 1988-89 KTMs
 
EBC brake shoes
for 1982 – 250 & 495 KTMs

#542-09-035-000 -        $30

 

EBC brake shoes

brake shoes for 83-250
and all 1984-85 KTM motorcycles that use

a double-linked brake cams

#543-09-035-000 -        $30

 

 

 

530 sprocket

for

cush

drive

hub

 

5.75" I.D.

PENTON REAR SPROCKETS

Fits all 1972-1973 175 bikes with round lug cush drive sprocket carrier with 5-3/4” diam. Center hole.
For size 530 chain


#52-10-051-052 –   52 T -   $78 each (new alloy)
#52-10-051-055 –   55 T-   $48 each (black alloy)
#52-10-051-057 –   57 T-   $48 each (black alloy)
#52-10-051-060 –   60 T-   $48 each (black alloy)

Conical

KTM

rear

hub

 SPROCKETS for 1973-83 conicle rear hubs
using size 530 chain (has 9  7mm bolt holes)
#52-10-051-148 - 48T-  $48 each (alloy)
#52-10-051-155 - 55T-   $40 each (steel)
#52-10-051-156 - 56T-   $52 each (alloy)
#52-10-051-157 - 57T-   $40 each (steel)
#52-10-051-160 - 60T-   $40 each (steel)

using size 520 chain (has 9  7mm bolt holes)
#51-10-051-552 - 52T-   $59 each (new alloy)
#51-10-051-554 - 54T-    $59 each (new alloy)
#51-10-051-556 - 56T-    $48 each (alloy)
#51-10-051-557 - 57T-    $48 each (alloy)
#51-10-051-558 - 58T-    $48 each (alloy)

Sprocket for

Conical

KTM

rear hub

 

7-7/8" I.D.

Sprocket for

Conical

KTM

rear hub

 

6.5" I.D.

520 SPROCKETS

for 1980 125 w/conicle rear hub

with 9 (6mm) bolt holes, measures 6-1/2" I.D.

 

#510-10-051-052 -  52T    $48 each (alloy)

#510-10-051-057 -  57T    $48 each (alloy)

#510-10-051-058 -  58T    $48 each (alloy)

Sprocket for

Conical

KTM

rear hub

 

6.5" I.D.

520 SPROCKETS for 1984+ KTM's

with 6 (8mm counter sunk) bolt holes,

measures 6-1/2" I.D.

 

#543-10-051-045 -  45T    $48 each (alloy)

#543-10-051-048 -  48T    $48 each (alloy)

#543-10-051-050 -  50T    $48 each (alloy)

#543-10-051-052 -  52T    $48 each (steel)

 

A   4 lug style

 

B  small size

C  large size

CUSH DRIVE RUBBER

for all Penton motorcycles using rear cush drive

 

A- # 6-50-000 -               $2.50 each

          for 1968 bikes with 4 lug cush drive

B- # 51-10-059-000 -       $24 set of 6

           small size cush drive rubber

C- # 51-51-10-059-300 -       $15 set of 6

            large size cush drive rubber (taper fit)

            O.D. 34-31mm  I.D. 23.5-21.8mm  H 17mm

 

 

   A                            B 

REAR AXLE

for all 1972 thru 1973 CMF bikes using the cush drive straight rear hub

 

A- #51-10-085-000    $35 each

           rear axle

B- #0985-120-003     $1 each

           self locking 12mm nut

 

 

 

        A                    A                  B

REAR WHEEL PARTS - CONICAL HUB

for 1973+ bikes

 

A- #0625-063-037 -         $6 each

              bearing 6303 (2 required)

B- #52-10-096-000 -        $1.25 each

               circlip

SMALL CUSH DRIVE SPROCKET CARRIER PARTS

used on all early 1972-73 bikes with small size cush drive rubbers

 

 

 

 

 

        A              B                 C                   D                     D                    C                       E

 

A- #0936-201-503   nut, size M20x1 -        $3.00 each

B- #51-10-038-000  flat washer                  $ .75 each

C- #0232-126-001   ball bearing 6004 (2 required)-     $5.25 each

D- #1-503-092         circlip, 42 mm (2 required)-           $1.75 each

E- #51-10-054-100  sprocket axle -         * * Sold Out **

 

LARGE CUSH DRIVE SPROCKET CARRIER PARTS

used on later 1974-75 bikes with large size cush drive rubbers

 

 

 

 

 

 

 

         A              B                 C                   D                    D                   E                       F

 

A- #0936-201-503   nut, size M20x1 -       $3.00 each

B- #51-10-038-000  flat washer -              $ .75 each

C- #0625-062-046   ball bearing 6204 (1 required) -     $5.25 each

D- #0472-471-750   circlip 47mm (2 required) -            $1.25 each

E- #0625-060-056    ball bearing 6005 (1 required) -    $5.95 each

F- #51-10-054-300  sprocket axle -            * * Sold Out **

REAR WHEEL PARTS - Straight Hub

for all 1972-73 175cc Penton motorcycles using the straight hub for CUSH drive

 

 

 

 

 

 

 

               

               A                        B                          B                        A                          B                     B

 

A- #6-16-000          circlip (2 required) -              $1.25 each

B- #0625-060-036  bearing 6003 (4 required)-    $5.25 each

FRONT WHEEL HUB PARTS

for all 1972+ Penton & KTM motorcycles

 

 

 

 

 

 

 

 

 

                 A                               B                            C                            C                           B

 

A- #6-20-000          seal (1 required)-                   $6.50 each

B- #6-16-000           circlip (2 required)-              $1.25 each

C- #0625-060-036   bearing 6003 (2 required)-    $5.25 each

    also (not shown)  #6-34-000    seal for inside of backing plate -   $8.00 each

Dunlop RIM LOCKS

fits size WM1 rims (front)

#99-HP-906 -         $5 each