New reproduction
Fork Bumpers
for all Penton & KTM motorcycles.
# 51-03-090-000 - $9 each
A B C
Reproduction C's FORK BOOTS
A -
#1-48-000 -
$30 pair
N.O.S.
(1969-71) 35mm, black
B - # 1-503-093 -
$32 pair
(1972-73) 32mm boot, black
C - #1-637-09 -
$34 pair
35mm boot, black
New reproduction
FORK GAITERS
FOR sherry C's FORKS
used on 1968 Penton motorcycles
#1-28-000 fork gaiters - $60 pair
The modern solution to keep dirt and dust from entering fork seals and causing oil leakage. One size stretches to fit 32mm sherry forks. (Replaces fork boots)
Available in
3
colors. Washable and reusable.
#1-48-101 – Black
#1-48-102 – Silver
#1-48-103 – Blue
Only $20 pair
for 35mm & 38mm C's or Marzocchi forks.
(Replaces fork boots)
Available in
2
colors. Washable and reusable.
#1-50-101 – Black
#1-50-105 – RED
Only $20 pair
A B
FORK SEALS for sherry C's
A -
#1-503-091 -
$6.50 each
32mm x
7 double lip seal
B - #1-265-0514 -
$6.00 each
35mm x 7 double lip seal
NOTE: C's forks use 2 seals per fork leg
ALUMINUM FENDER BRACKET
bracket used on 1972 Pentons with aluminum front fenders.
Bracket bolts up under bottom of 32mm triple tree.
Two mounting holes on end of
bracket are used to bolt the front fender.
#51-08-011-000 -
$23 each
Reproduction
Front Fender Bracket
Stainless steel bracket fits all 1974 to 1976 bikes with 35mm sherry C
forks. Spaces plastic front fender for proper positioning. Extension has
a hole to hold front brake cable.
#54-08-018-000 - $9 each
NUMBER PLATE BRACKETS
For mounting front number plate to front forks.
Bracket snaps onto front fork tubes and is held
in place with large rubber band (included). Made of
stainless steel to prevent rusting.
#51-01-087-000 -
$16 each
32mm size bracket
#51-01-087-100 -
$16 each
35mm size bracket
#51-01-088-000 -
$1.50 each
extra rubber band
STEEL NUMBER PLATES
with rolled beveled edging
Painted with grey primer
size - aprox. 8-5/8" (220mm) x 10-7/8" (275mm)
#51-01-090-000 -
$16 each
Oval steel number plate
STEEL HEAD LIGHT NUMBER PLATES
with rolled beveled edging
Painted with grey primer
size - aprox. 8-5/8" (220mm) x 10-7/8" (275mm)
#2-7-001 -
$18 each
for small headlight
STEEL HEAD LIGHT NUMBER PLATES
with rolled beveled edging
Painted with grey primer
size - aprox. 8-5/8" (220mm) x 10-7/8" (275mm)
#51-01-091-000 -
$18 each
for large headlight
A
B
C
Plastic Oval Number Plates
size - aprox. 9" (230mm) x 11" (280mm)
A #55-01-090-100 Yellow - $5 each or
3 for $12
B #55-01-090-200 White - $5 each or
3 for $12
C #99-65023 Green - $5 each
A
B
HANDLEBAR CLAMPS
FOR 1968-71 C's TOP FORK
PLATES
A - #2-4-000 -
$3 each
chrome U-bolt
B - #2-3-000 -
$5 each
saddle clamp
Handlebar Clamps
#1-627-012 - $3.50 each
for 35mm sherry C forks
holes measure 30mm c to c
A B C
New reproduction
Steering Head Race kit
#51-01-086-044
- only $42 each
includes: 2 inner
races, 2 outer races,
34 balls, &
2 viton O-rings
also available separately:
A-
#51-01-083-000 - $11 each
inner race (for steering head)
43mm O.D. x 26.5mm I.D. x 5.25mm thick
B-
#51-01-085-000 -
$11 each
outer race (for fork plate & bushing)
43mm O.D. x 26.5mm I.D. x 5.25mm thick
C- #2-52-100 -
$2 each
RUBBER WASHERS
used under steel washers throughout bike
to protect plastic and painted parts
#51-05-082-100 - $ .20 each
or 1 pack of 50 for $9
C's Steering Stem threaded bushing
Holds outer steering race.
#2-48-000 - $10 each
31mm dia. for 1968-71 35mm (short) Ceriani's.
#1-623-042 - $17 each
30mm dia. for 1972+ 32 & 35mm Ceriani's
photo showing positioning of label on fork leg
C's sherry Fork Decals
size 7/8" x 2-1/4"
#1-00230 - black printing on clear background $5 pair
also available (not shown)
#1-00311 - white printing for shocks $5 pair
NOTE: labels should be trimmed on top, bottom, and sides before installing.
C's 32mm Fork Tube Nut Assy.
Nut assy. includes: O-ring, ball, valve spring, & tapered head screw.
#1-503-021 $26 each
A
B
C
C's Fork Cap Parts
A- #1-240-022 - $ .80 each
valve spring
B- #1-240-023 - $1 each
valve spring
C- #1-88-043 - $ .20 each
ball
A
B
C's Valve & Springs
A- #1-209-0610 - $4.50 ea
stop valve
B- #1-209-0612 - $3 pack (2)
replacement spring washers
Valve Rebuild Kit for 35mm sherry
for leading axle forks (1976-78)
used in lower part of dampening rod
#1-844-065 - $13.50 each
A B
C's Oil Drain Screws
A- #0250-112-100 - $ .40 each
copper sealing ring
B- #1-88-0511 - $ .40 each
drain screw
Have a question about which part is right for your bike?
Are you ready to place an order?
Call: Al Buehner - (216) 651-6559 Mon-Fri 8:30am to 5pm E.S.T.
or Fax us a list of your quantities and part numbers: 216-651-1620